Hopiphany White IPA- Archived
The ultimate tuxedo tee shirt beer. Centennial and Falconer's Flight hops are the real stars here, added late for maximum aroma and flavor, they add piney, floral and bright citrus notes. They are backed mightily by golden pale ale malt...
Click here for printable instructions.
The ultimate tuxedo tee shirt beer. Centennial and Falconer's Flight hops are the real stars here, added late for maximum aroma and flavor, they add piney, floral and bright citrus notes. They are backed mightily by golden pale ale malt and laced with a zing of spice nuance that the yeast adds to the party. This is an inspired White IPA that will leave you reveling in it's complexity, and yearning for more!
To learn more about IPA's or to help you decide which IPA to brew next, check out our IPA Recipe Guide.
RECIPE INCLUDES:
- 1 Can Northwest Pale Ale Brewing Extract
- 1 Packet Dry Brewing Yeast (under lid of Brewing Extract)
- 1 Packet Safbrew T-58 Dry Yeast
- 1 BrewMax LME Softpack - Golden
- 1 Packet Nugget Hop Pellets (.5 oz.)
- 1 Packet Falconers Flight Hop Pellets (.5 oz)
- 1 Muslin Hop Sack
- 2 Packets No-Rinse Cleanser
Additional Information
- OG: 1.059 (approx.) -- FG: 1.018 (approx.)
- Flavor: Hoppy
- ABV (alc/vol): 5.5%
- SRM (Color): 6
- IBU (Bitterness): 45
- BJCP Style: 21. IPA - 21B. Specialty IPA: White IPA
Fermentation |
Carbonation |
Bottle
|
Total Brew­ing Time |
|
| 3 Weeks | 3 Weeks | 1 - 3 Weeks | = | 2 Months |
Click here for printable instructions.
Hopiphany White IPA Instructions
RECIPE INCLUDES:
- 1 Can Northwest Pale Ale Brewing Extract
- 1 Packet Dry Brewing Yeast (under lid of Brewing Extract)
- 1 Packet Safbrew T-58 Dry Yeast
- 1 BrewMax LME Softpack - Golden
- 1 Packet Nugget Hop Pellets (.5 oz.)
- 1 Packet Falconers Flight Hop Pellets (.5 oz)
- 1 Muslin Hop Sack
- 2 Packets No-Rinse Cleanser
Additional Information
- OG: 1.059 (approx.) -- FG: 1.018 (approx.)
- Flavor: Hoppy
- ABV (alc/vol): 5.5%
- SRM (Color): 6
- IBU (Bitterness): 45
- BJCP Style: 21. IPA - 21B. Specialty IPA: White IPA
Fermentation |
Carbonation |
Bottle
|
Total Brewing Time |
|
| 3 Weeks | 3 Weeks | 1 - 3 Weeks | = | 2 Months |
STEP 1: SANITIZING
Follow the steps outlined in your Mr. Beer Kit Instructions. (You can find a copy of these instructions to download by visiting our help desk.)
NOTE: BE SURE TO SANITIZE EVERYTHING THAT WILL COME INTO CONTACT WITH YOUR BEER.
STEP 2: BREWING
Brewing beer is the process of combining a starch source (in this case, a malt brewing extract) with yeast. Once combined, the yeast eats the sugars in the malt, producing alcohol and carbon dioxide (CO2). This process is called fermentation.
- Remove the yeast packet (not needed for this recipe) from under the lid of the can of Brewing Extract, then place the unopened can and LME softpack in hot tap water.
- Using the measuring cup, pour 4 cups of water into your clean 3-quart or larger pot, then Bring water to a boil, then remove from heat.
- Open the Brewing Extract and the LME, and pour all contents into the hot mixture. Stir until thoroughly mixed. This mixture of unfermented beer is called wort.
- Fill keg with cold tap water to the 4-quart mark on the back.
- Pour the wort into the keg, and then bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously with the spoon or whisk.
- Sprinkle ONLY the Safbrew T-58 dry yeast packet into the keg, and screw on the lid. Do not stir.
- Put your keg in a location with a consistent temperature between 68° and 76°F (20°-24°C) and out of direct sunlight. Ferment for 14 days.
- After approximately 72 hours, you will be able to see the fermentation process happening by shining a flashlight into the keg. You'll see the yeast in action in the wort. The liquid will be opaque and milky, you will see bubbles rising in the liquid, and there will be bubbles on the surface.
- At the 1 week mark, place the contents of all the pellet hops packets into the sanitized hop sack tying it closed, then trim away excess material.
- Open the lid of the fermenter and toss in the hop sack, replace lid. You'll leave the hop sack in the wort for the duration of fermentation.
Your fermentation will usually reach its peak in 2 to 4 days (this is also known as “high krausen”). You may see a layer of foam on top of the wort, and sediment will accumulate at the bottom of the fermenter. This is totally normal.
After high krausen the foam and activity will subside and your batch will appear to be dormant. Your beer is still fermenting. The yeast is still at work slowly finishing the fermentation process.
Step 3: BOTTLING AND CARBONATING
Follow the steps outlined in your Mr. Beer Kit Instructions. (You can find a copy of these instructions to download by visiting our help desk.)