No-Rinse Cleanser
No-Rinse Cleanser is rated
out of
5 by
968.
WEIGHT 1.46 OUNCES (41 GRAMS)
$1.45
In stock
SKU
40-40010-00
This is a No-Rinse Cleanser that cleans and disinfects with oxygen and doesn't require rinsing when used to disinfect. When used properly, it will not contribute to off flavors in your beer. This single pouch will prepare both keg and bottles for one batch of beer.
Fill clean keg with warm water to the line mark 1 on the back of your Little Brown Keg, then add ½ of the No-Rinse Cleanser pack (about 1 tablespoon) and stir until dissolved. Once dissolved, the solution is ready to use.
If you are brewing with another fermenter, simply add ½ of the No-Rinse Cleanser pack (about 1 tablespoon) to 1 gallon of warm water, stir until dissolved, and use as needed.
Rated 5 out of
5
by
Clarence Couch from
MR. Beer's Secret to success!
The first step in brewing great beer is to make sure evertying that comes in contact with the worts and beer is completely sterilized and this is what makes it SUPER easy. The no hassle way to completely sterilize everything and Mr. beer makes it SO easy! Just put water in the fermenter and sprinkle a half a pack of the no-rinse cleaner into it and shake. Let sit for 2 minutes and shake again and that's it! Then you can pour that in to a bowl or pot and sterilize all your utinsiles! Like it says, "no rinse". BTW, the other half of the packet is for sterilizing the bottles when it's time for that. Just another way Mr. Beer makes it SO easy , fun and rewarding to brew great beer, every time.
Date published: 2021-02-25
Rated 4 out of
5
by
the Blue Max from
A must have if you want a good taste!
A great and simple cleaner that really works! Tried the old fashioned recipe ( water & bleach and water & vinegar ) but always a negative taste. this is so much easier and a great time saver.
Date published: 2024-04-17
Rated 5 out of
5
by
TLC_WV from
Mr. Beer takes the fear out of sanitizing
Mr Beer No-Rinse Cleanser is easy and effective. Just mix with warm water and you are ready to go. Shake inside your fermenter vessel whether the little brown keg (LBR) or brew bucket. Run some through the spout. Soak your brewing tools and get to making beer. Mr. Beer takes the fear out of sanitizing.
Date published: 2020-05-07
Rated 5 out of
5
by
Gbow from
Works great
Cleaned and sanitized all my equipment fast and easily
Date published: 2017-03-03
Rated 4 out of
5
by
Anonymous from
Floaters
Even with thorough mixing there are little particles of cleaner floating in the bowl. I had to learn to ignore those.
Date published: 2020-09-06
Rated 5 out of
5
by
dmac from
? you could have printed instructions on the pack
Good & easy to use,but needs directions on the package.
I sent some to my uncle who never used it before,he then bought starsan.
Date published: 2017-06-25
Rated 5 out of
5
by
JohnK from
Very simple to use.
Great product, very simple to use. Have had good luck so far with using this product.
Date published: 2016-05-04
Rated 5 out of
5
by
Hector from
Found Mr. Beer Kit
I just started brewing with Mr. Beer when I found a kit and a variety pack that somehow ended in my shed and because of Covid-19 I went ahead and started brewing. Naturally this first batch was not good as the Yeast had expired a while back. I then decided to order refills and try it out. Not sure how far this hobby is going to take me, but planning and scheduling the next batch is key for keeping your refrigerator stock.
Date published: 2020-07-26
Can I use this to clean my fermenter after brewing a bacth before starting the next batch
It's best to use no-rinse right before a new brew. Cheers!
Date published: 2022-12-27
Is this the same product as “Oxygen Brewery Wash”, but in a smaller package?
It it similar but not the same. Brewery wash should be rinsed. Cheers!
Date published: 2022-06-27
Can I pre-mix the cleaner in a spray bottle or will it lose its potency if left in a bottle? Thank you, Chuck
No-rinse when left in solution (wet) will lose its potency. Starsan is a better option for keeping on hand, in a spray bottle. Cheers!
Date published: 2022-06-20
Is this stuff suppose to be slimy? I mixed the exact amount stated in the directions and there is a definite slime on everything it touches. Also, small, clear bb sized balls left in sink from the cleanser.
It can be a bit slimy to the touch. This is because it contains an ingredient that helps it cling to the surface of your equipment. Cheers!
Date published: 2022-04-15
Is it supposed to be slimy? I followed the instructions and its so slimy!
Yes, it is! This is so your sanitizer clings to your equipment rather than rolling right off! Cheers!
Date published: 2022-01-13
Is this enough to sanitize a 6 gallon fermenter and utensils and bottles ?
Yes, as long as you make up a 1 gallon of water per half a packet solution and distribute it over all parts of your fermenter. Cheers!
Date published: 2021-12-28