Welcome to MR.BEER® - Pilothouse Pilsner

Pilothouse Pilsner

Use these instructions when brewing any of our PREMIUM BREW PACKS. Made with 2 cans of Premium Hopped Malt Extract (beer mix), these brews are specially formulated to produce 2 gallons of our highest-quality beer.

BREW PACK INCLUDES:
2 Cans Pilothouse Pilsner (beer mix)
2 Packets Dry Brewing Yeast
1 Packet One-Step™ Sanitizing Cleanser

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet from under lid of both beer mixes, then place unopened cans in hot water (warm liquid pours more easily).

2.3. Using a sanitized measuring cup, place 4 cups of water into a clean 3-quart pot.

2.4. Bring water to a boil and remove from heat. Stir both cans of beer mix into pot (this mixture is called the wort).

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE.

2.5. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously to mix well.

2.6. Sprinkle both yeast packs into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.7. Place keg out of direct sunlight, in a location with a consistent temperature (between 68°-76°F)

Allow to sit a MINIMUM OF 7 DAYS.

TIP: FOR OPTIMAL FLAVOR ALLOW TO SIT FOR 14 DAYS.

CAUTION: DO NOT OPEN BREW KEG LID AT ANY TIME DURING FERMENTATION; THIS CAN CAUSE BEER SPOILAGE.

Step 3: Bottling/Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.



	Privacy Policy \| Shipping Policy \| Product Registration \| Contact Us \| Help? U.S.A. ©2008 Catalina Products, LLC. All rights reserved.