Welcome to MR.BEER® - Lover's Aphrodisiac Delight

Lover's Aphrodisiac Delight

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 4 WEEKS TIME.
Suggested lager time is 2 months.

Love is wasted on the young. That's why this beer requires two months of cold conditioning to reach maturity. Capture the moment with this flavorful fruity beer. Firm in body and high in alcohol. The rest is up to you!

RECIPE INCLUDES:
1 Can High Country Canadian Draft
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Can Boysenberries in Light Syrup
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
3/4 Cup Honey

Lover's Aphrodisiac Delight

Flavor: Balanced
Alc/Vol: 4.9%
SRM (Color): 3
IBU (Bitterness): 22

ABV -- Strength given in percent of alcohol by volume.

SRM -- Color based on Standard Reference Method, where as:
(fruits may give some additional color.)
- Pale Beers are between 0 - 6
- Amber Beers are between 7 - 13
- Dark Beers are 14 - 20
- Black Beers are 21 and over

IBU -- Shown in International Bittering Units, where:
- Low bitterness 0 - 20
- Moderate bitterness 21 - 30
- Noticeable bitterness 31 and over

Lover's Aphrodisiac Delight

Love is wasted on the young. That's why this beer requires two months of cold conditioning to reach maturity. Capture the moment with this flavorful fruity beer. Firm in body and high in alcohol. The rest is up to you!

RECIPE INCLUDES:
1 Can High Country Canadian Draft
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Can Boysenberries in Light Syrup
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
3/4 Cup Honey

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

NOTE: POUR SANITIZER FROM YOUR BREW KEG INTO A BLENDER AND SOAK 10 MINUTES BEFORE DISCARDING EXCESS SANITIZER.

Step 2: Brewing
2.1. In your sanitized blender, purée the fruit, and set it aside to add later (step 2.7).

2.2. Fill keg with cold water to the 4-quart mark on the back.

2.3. Remove yeast packet from under lid of beer mix, then place unopened can of mix in hot water to make the liquid easier to pour.

2.4. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot, then SLOWLY sprinkle in 1/2 pouch (1 cup) of Booster™ while continually stirring to avoid clumping.

2.5. Once the Booster™ is fully dissolved bring to a boil, then remove from heat. Add 3/4 cup of honey, stir to mix well.

2.6. Stir beer mix into mixture of water and Booster™. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE.

2.7. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Add your pureed fruit, stir vigorously to mix well.

2.8. Sprinkle yeast into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.9. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF TWO WEEKS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 2 MONTHS.

1-Liter Deluxe Bottling System (Qty 8)
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: In stock!

Professional Bottling System
$35.87

AVAILABILITY: Out of stock!



	Privacy Policy \| Shipping Policy \| MR.BEER® Community \| Product Registration \| Contact Us \| Help? MR.BEER® is a division of Catalina Products, LLC. ©2009 All rights reserved.