Mr.Beer - beer kits, home brewing systems, and microbrewery supplies

Jefferson's Colonial Ale

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 3 WEEKS.
OG: 1.047 (approx.) -- FG: 1.012 (approx.)
Suggested lager time is 2 to 4 weeks.

Thomas Jefferson was quite a statesman, lady's man and a noted brewer. Relive the life and times at Monticello with this historic brew that is bound to please. Coriander was widely used to help improve the flavors of beers of this period and brown sugar is typical of the unrefined sugars available for additional sweetening.

RECIPE INCLUDES:
1 Can Englishman's Nut-Brown Ale HME
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of HME)
1 Packet No-Rinse Cleanser

YOU PR0VIDE:
3/4 Cup Dark Brown Sugar
3/4 Teaspoon Crushed Coriander Seed

Jefferson's Colonial Ale

Flavor: Malty
ABV (alc/vol): 4.6%
SRM (Color): 12
IBU (Bitterness): 22

ABV -- An estimate of alcohol content given in percent of alcohol by volume. Your actual abv may vary.

SRM -- Color based on Standard Reference Method, where as:
- Pale Beers are between 0 - 6
- Amber Beers are between 7 - 13
- Dark Beers are 14 - 20
- Black Beers are 21 and over
(fruits may add additional color.)

IBU -- Bitterness shown in International Bittering Units, where:
- Low bitterness 0 - 20
- Moderate bitterness 21 - 30
- Noticeable bitterness 31 and over

Jefferson's Colonial Ale

Thomas Jefferson was quite a statesman, lady's man and a noted brewer. Relive the life and times at Monticello with this historic brew that is bound to please. Coriander was widely used to help improve the flavors of beers of this period and brown sugar is typical of the unrefined sugars available for additional sweetening.

RECIPE INCLUDES:
1 Can Englishman's Nut-Brown Ale HME
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Packet No-Rinse Cleanser

YOU PR0VIDE:
3/4 Cup Dark Brown Sugar
3/4 Teaspoon Crushed Coriander Seed

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet from under lid of HME, then place unopened can in hot water to make the liquid easier to pour.

2.3. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot, then SLOWLY sprinkle in 1/2 pouch (1 cup) of Booster™ while continually stirring to avoid clumping.

2.4. Once the Booster™ is fully dissolved bring to a boil, then remove from heat. Add 3/4 cup dark brown sugar and 3/4 tsp. crushed coriander seed. Stir to mix well.

2.5. Stir HME into mixture. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE.

2.6. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously to mix well.

2.7. Sprinkle yeast into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.8. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF TWO WEEKS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 2-4 WEEKS.

1-Liter Deluxe Bottling System (Qty 8)
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: In stock!

Professional Bottling System
$35.87

AVAILABILITY: In stock!



	Privacy Policy \| Shipping Policy \| Community Forum \| Product Registration \| Contact Us \| Help Desk MR.BEER® is a division of Catalina Products, LLC. ©2011 All rights reserved.