Mr.Beer - beer kits, home brewing systems, and microbrewery supplies

Good Witch Red

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 3 WEEKS TIME.
Suggested lager time is 1 to 2 weeks.

Wing of bat and eye of Newt, wart of toad and tail of lizard, none of these can be found in this witches brew. Our witch prefers only the finest ingredients in her cauldron. Ruby red in color, with a surprisingly bright lingering taste, it's reminiscent of the spring gone by. Brew up some in your in your cauldron as your All Hallows Eve offering to the mature gremlins that may happen by.

RECIPE INCLUDES:
1 Can Bewitched Red Ale
1 Can Pale Export UME
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Packet Cascade Pellet Hops
1 Muslin Hop Sack
1 Packet One-Step™ Sanitizing Cleanser

Good Witch Red

Flavor: Hoppy
Alc/Vol: 4.5%
SRM (Color): 9
IBU (Bitterness): 11

ABV -- Strength given in percent of alcohol by volume.

SRM -- Color based on Standard Reference Method, where as:
(fruits may give some additional color.)
- Pale Beers are between 0 - 6
- Amber Beers are between 7 - 13
- Dark Beers are 14 - 20
- Black Beers are 21 and over

IBU -- Shown in International Bittering Units, where:
- Low bitterness 0 - 20
- Moderate bitterness 21 - 30
- Noticeable bitterness 31 and over

Good Witch Red

Wing of bat and eye of Newt, wart of toad and tail of lizard, none of these can be found in this witches brew. Our witch prefers only the finest ingredients in her cauldron. Ruby red in color, with a surprisingly bright lingering taste, it's reminiscent of the spring gone by. Brew up some in your in your cauldron as your All Hallows Eve offering to the mature gremlins that may happen by.

RECIPE INCLUDES:
1 Can Bewitched Red Ale
1 Can Pale Export UME
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Packet Cascade Pellet Hops
1 Muslin Hop Sack
1 Packet One-Step™ Sanitizing Cleanser

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

NOTE: BE SURE TO SANITIZE YOUR HOP SACK ALONG WITH ALL YOUR OTHER EQUIPMENT.

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet from under lid of beer mix, then place unopened cans of mix and UME in hot water to make the liquid easier to pour.

2.3. Place 1 packet (1/2 oz.) of Cascade pellet hops into the hop sack tying it closed, then trim away excess material.

2.4. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot and bring to a boil, then remove from heat.

2.5. Stir beer mix, UME and hops (in hop sack) into this water. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE. KEEP HOPS IN FERMENTER THE ENTIRE FERMENTATION PERIOD.

2.6. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously to mix well.

2.7. Sprinkle yeast into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.8. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF TWO WEEKS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 2 TO 4 WEEKS.

1-Liter Deluxe Bottling System (Qty 8)
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: Out of stock!

Professional Bottling System
$35.87

AVAILABILITY: In stock!



	Privacy Policy \| Shipping Policy \| MR.BEER® Community \| Product Registration \| Contact Us \| Help Desk MR.BEER® is a division of Catalina Products, LLC. ©2010 All rights reserved.