Welcome to MR.BEER® - Caribbean Lime Lager

Caribbean Lime Lager

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 2 WEEKS TIME.
Suggested lager time is 2 to 4 weeks.

This smooth, mellow beer is slightly sweet, with just a kiss of lime. Finishes clean and dry. A bit of sunshine really brings out the flavor. Reggae music is optional. Yeah Mon!

RECIPE INCLUDES:
1 Can Englishman's Nut-Brown Ale
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
1/4 Cup Brown Sugar
1/2 Cup Honey
2 Small Limes (with juice and grated zest)

All MR.BEER® mixes feature a complex blend of Pale malt, Caramel malt, Chocolate malt, Vienna malt and Munich malt. Blended with the finest hops by master brewers in state-of-the-art facilities, they provide the optimum flavor profiles for award winning beers.

Caribbean Lime Lager

Flavor: Malty
Alc/Vol: 4.4%
SRM (Color): 13
IBU (Bitterness): 14

Alc/Vol -- Strength given in percent of alcohol by volume.

SRM -- Color based on Standard Reference Method, where as:
(fruits may give some additional color.)
- Golden Beers are between 0 - 6
- Amber Beers are between 7 - 12
- Dark Beers are 13 and over

IBU -- Shown in International Bittering Units, where:
- No bitterness 0 - 9
- Modest bitterness 10 - 19
- Noticeable bitterness 20 and over

Caribbean Lime Lager

This smooth, mellow beer is slightly sweet, with just a kiss of lime. Finishes clean and dry. A bit of sunshine really brings out the flavor. Reggae music is optional. Yeah Mon!

RECIPE INCLUDES:
1 Can Englishman's Nut-Brown Ale
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
1/4 Cup Brown Sugar
1/2 Cup Honey
2 Small Limes (juice and grated for zest)

Step 1: Sanitizing
Follow the steps outlined in the Instructions that came with your kit.

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet from under lid of beer mix, then place unopened can in hot water to make the liquid easier to pour.

2.3. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot, then SLOWLY sprinkle in Booster™ while continually stirring to avoid clumping.

2.4. Once the Booster™ is fully dissolved, add lime juice (from 2 small limes) and grated zest. Bring to a boil, cover and boil for 5 minutes, then remove from heat. Add 1/4 cup of brown sugar and 1/2 cup honey, stir to mix well.

2.5. Stir beer mix into mixture. This mixture is called the wort.

NOTE: Hops will appear as green leaf particles and will not dissolve.

2.6. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously to mix well.

2.7. Sprinkle yeast into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.8. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF SEVEN DAYS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in the Instructions that came with your kit.

TIP: For best results allow to lager for at least 2 to 4 weeks.



	Privacy Policy \| Shipping Policy \| Product Registration \| Contact Us \| Help? U.S.A. ©2008 Catalina Products, LLC. All rights reserved.