Mr.Beer - beer kits, home brewing systems, and microbrewery supplies

Defibrillator Doppelbock 7.0

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 3 WEEKS TIME.
Suggested lager time is 2 months.

Only to be used in case of extreme emergency -- this defibrillator doppelbock is a step above our original aptly named defibrillator recipe. At 7.0% alcohol by volume, this will revive not only your heart, but your soul as well.

RECIPE INCLUDES:
1 Can Linebacker Doppel Bock
1 Can Creamy Brown UME
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
1 Cup Honey

Defibrillator Doppelbock 7.0

Flavor: Malty
Alc/Vol: 7.2%
SRM (Color): 37
IBU (Bitterness): 22

ABV -- Strength given in percent of alcohol by volume.

SRM -- Color based on Standard Reference Method, where as:
(fruits may give some additional color.)
- Pale Beers are between 0 - 6
- Amber Beers are between 7 - 13
- Dark Beers are 14 - 20
- Black Beers are 21 and over

IBU -- Shown in International Bittering Units, where:
- Low bitterness 0 - 20
- Moderate bitterness 21 - 30
- Noticeable bitterness 31 and over

Defibrillator Doppelbock 7.0

Only to be used in case of extreme emergency -- this defibrillator doppelbock is a step above our original aptly named defibrillator recipe. At 7.0% alcohol by volume, this will revive not only your heart, but your soul as well.

RECIPE INCLUDES:
1 Can Linebacker Doppel Bock
1 Can Creamy Brown UME
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
1 Cup Honey

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet from under lid of beer mix, then place unopened cans of mix and UME in hot water to make the liquid easier to pour.

2.3. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot, then SLOWLY sprinkle in Booster™ while continually stirring to avoid clumping.

2.4. Once the Booster™ is fully dissolved bring to a boil, then remove from heat. Add 1 cup honey, stir to mix well.

2.5. Stir beer mix and UME into mixture of water, Booster™ and honey. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE.

2.6. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously to mix well.

2.7. Sprinkle yeast into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.8. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF TWO WEEKS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 2 MONTHS.

1-Liter Deluxe Bottling System (Qty 8)
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: Out of stock!

Professional Bottling System
$35.87

AVAILABILITY: In stock!



	Privacy Policy \| Shipping Policy \| MR.BEER® Community \| Product Registration \| Contact Us \| Help Desk MR.BEER® is a division of Catalina Products, LLC. ©2010 All rights reserved.