Honey Brown Ale

Flavor: Balanced
Alc/Vol: 4.1%
SRM (Color): 7
IBU (Bitterness): 22

ABV -- Strength given in percent of alcohol by volume.

SRM -- Color based on Standard Reference Method, where as:
(fruits may give some additional color.)
- Pale Beers are between 0 - 6
- Amber Beers are between 7 - 13
- Dark Beers are 14 - 20
- Black Beers are 21 and over

IBU -- Shown in International Bittering Units, where:
- Low bitterness 0 - 20
- Moderate bitterness 21 - 30
- Noticeable bitterness 31 and over

Honey Brown Ale

Our Honey Brown Ale recipe produces a dry, but malty copper colored ale. The honey gives it a light body and imparts notes of honey to the finish.

RECIPE INCLUDES:
1 Can Englishman's Nut-Brown Ale
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Packet U.S. Goldings Pellet Hops
1 Muslin Hop Sack
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
1 1/2 Cups Honey



Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

NOTE: BE SURE TO SANITIZE YOUR HOP SACK ALONG WITH ALL YOUR OTHER EQUIPMENT.



Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet from under lid of beer mix, then place unopened can of mix in hot water to make the liquid easier to pour.

2.3. Place 1/2 packet (1/4 oz.) of U.S. Goldings pellet hops into the hop sack tying it closed, then trim away excess material. (Save the balance of the hops in the freezer for another batch of beer.)

2.4. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot.

2.5. Bring to a boil, then remove from heat. Add 1 1/2 cups of honey, stir to mix well.

2.6. Stir beer mix and hops (in hop sack) into mixture. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE. KEEP HOPS IN FERMENTER THE ENTIRE FERMENTATION PERIOD.

2.7. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously to mix well.

2.8. Sprinkle yeast into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.9. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF SEVEN DAYS at room temperature (between 68°-76°F).



Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 2 TO 4 WEEKS.

1-Liter Deluxe Bottling System (Qty 8) $13.95 AVAILABILITY: In stock!		16 oz. Glass Swing-Top Bottles (Qty 12) $29.95 AVAILABILITY: In stock!
Professional Bottling System $35.87 AVAILABILITY: Out of stock!