Welcome to MR.BEER® - Pick N' Roll Pilsner

Pick N' Roll Pilsner

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 3 WEEKS TIME.
Suggested lager time is 2 to 4 weeks.

Practice this well designed play and you'll score every time. This hoppy beer will get you moving down the road to celebration. With a little extra lagering time, you will end up with a crisp, golden pale success.

RECIPE INCLUDES:
1 Can Classic American Light
1 Can Pale Export UME
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Packet Sterling Pellet Hops
1 Packet Argentine Cascade Pellet Hops
2 Muslin Hop Sacks
1 Packet One-Step™ Sanitizing Cleanser

All MR.BEER® mixes feature a complex blend of Pale malt, Caramel malt, Chocolate malt, Vienna malt and Munich malt. Blended with the finest hops by master brewers in state-of-the-art facilities, they provide the optimum flavor profiles for award winning beers.

Pick N' Roll Pilsner

Flavor: Hoppy
Alc/Vol: 4.6%
SRM (Color): 6
IBU (Bitterness): 10

Alc/Vol -- Strength given in percent of alcohol by volume.

SRM -- Color based on Standard Reference Method, where as:
(fruits may give some additional color.)
- Golden Beers are between 0 - 6
- Amber Beers are between 7 - 12
- Dark Beers are 13 and over

IBU -- Shown in International Bittering Units, where:
- No bitterness 0 - 9
- Modest bitterness 10 - 19
- Noticeable bitterness 20 and over

Pick N' Roll Pilsner

Practice this well designed play and you'll score every time. This hoppy beer will get you moving down the road to celebration. With a little extra lagering time, you will end up with a crisp, golden pale success.

RECIPE INCLUDES:
1 Can Classic American Light
1 Can Pale Export UME
1 Packet Dry Brewing Yeast (under lid of beer mix)
1 Packet Sterling Pellet Hops
1 Packet Argentine Cascade Pellet Hops
2 Muslin Hop Sacks
1 Packet One-Step™ Sanitizing Cleanser

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

NOTE: BE SURE TO SANITIZE YOUR HOP SACK ALONG WITH ALL YOUR OTHER EQUIPMENT.

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet from under lid of beer mix, then place unopened cans of mix and UME in hot water to make the liquid easier to pour.

2.3. Place 1 packet (1/2 oz.) of Sterling pellet hops into one hop sack tying it closed, then trim away excess material. Repeat using 1 packet (1/2 oz.) of Argentine Cascade pellet hops into second hop sack.

2.4. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot and bring to a boil, then remove from heat.

2.5. Stir beer mix, UME and hops (in hop sacks) into this water. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE. KEEP HOPS IN FERMENTER THE ENTIRE FERMENTATION PERIOD.

2.6. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously to mix well.

2.7. Sprinkle yeast into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.8. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF TWO WEEKS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 2 TO 4 WEEKS.

MR.BEER® Deluxe Bottling System
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: In stock!

12 oz. Glass Long-Neck Bottles (Qty 24)
$22.95

AVAILABILITY: In stock!



	Privacy Policy \| Shipping Policy \| Product Registration \| Contact Us \| Help? U.S.A. ©2008 Catalina Products, LLC. All rights reserved.