Welcome to MR.BEER® - Shocktoberfest

Shocktoberfest

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 4 WEEKS TIME.
Suggested lager time is 6 months.

At first rich and caramelly, this strong brew has just enough hop bitterness to balance the malt sweetness. A must with brats or your favorite Bavarian fare!

RECIPE INCLUDES:
3 Cans Octoberfest Vienna Lager
1 Can Mellow Amber UME
3 Packets Dry Brewing Yeast (under lid of beer mix)
2 Packets Sterling Pellet Hops
2 Packets Spalt Pellet Hops
1 Pouch Bock Liquid Yeast
2 Muslin Hop Sacks
1 Packet One-Step™ Sanitizing Cleanser

All MR.BEER® mixes feature a complex blend of Pale malt, Caramel malt, Chocolate malt, Vienna malt and Munich malt. Blended with the finest hops by master brewers in state-of-the-art facilities, they provide the optimum flavor profiles for award winning beers.

Shocktoberfest

Flavor: Hoppy
Alc/Vol: 9.2%
SRM (Color): 20
IBU (Bitterness): 39

Alc/Vol -- Strength given in percent of alcohol by volume.

SRM -- Color based on Standard Reference Method, where as:
(fruits may give some additional color.)
- Golden Beers are between 0 - 6
- Amber Beers are between 7 - 12
- Dark Beers are 13 and over

IBU -- Shown in International Bittering Units, where:
- No bitterness 0 - 9
- Modest bitterness 10 - 19
- Noticeable bitterness 20 and over

Shocktoberfest

At first rich and caramelly, this strong brew has just enough hop bitterness to balance the malt sweetness. A must with brats or your favorite Bavarian fare!

RECIPE INCLUDES:
3 Cans Octoberfest Vienna Lager
1 Can Mellow Amber UME
3 Packets Dry Brewing Yeast (under lid of beer mix)
2 Packets Sterling Pellet Hops
2 Packets Spalt Pellet Hops
1 Pouch Bock Liquid Yeast
2 Muslin Hop Sacks
1 Packet One-Step™ Sanitizing Cleanser

NOTE: A DAY OR TWO BEFORE BREWING, ACTIVATE YOUR LIQUID YEAST, FOLLOWING THE INSTRUCTIONS ON THE BACK OF THE YEAST PACKET.

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

NOTE: BE SURE TO SANITIZE YOUR HOP SACK ALONG WITH ALL YOUR OTHER EQUIPMENT.

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet (not needed for this recipe) from under lid of all beer mixes, then place unopened cans of mix and UME in hot water to make the liquid easier to pour.

2.3. Place both packets (1 oz.) of Sterling pellet hops into one hop sack tying it closed, then trim away excess material. Repeat with both packets (1 oz.) of Spalt pellet hops into one hop sack and tie a knot to seal the open ends.

2.4. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot.

2.5. Bring to a boil and add Sterling hops (in hop sack), then boil for 5 minuets and remove from heat.

2.5. Stir beer mix and UME into mixture. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE. KEEP HOPS IN FERMENTER THE ENTIRE FERMENTATION PERIOD.

2.6. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Add the Spalt hops (in hop sack). Stir vigorously to mix well.

2.7. Pour entire contents of liquid yeast into keg. Stir vigorously again, then screw on lid.

2.8. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF THREE WEEKS at room temperature (between 48°-58°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 6 MONTHS./font>

MR.BEER® Deluxe Bottling System
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: In stock!

12 oz. Glass Long-Neck Bottles (Qty 24)
$22.95

AVAILABILITY: In stock!



	Privacy Policy \| Shipping Policy \| Product Registration \| Contact Us \| Help? U.S.A. ©2008 Catalina Products, LLC. All rights reserved.