Mr.Beer - beer kits, home brewing systems, and microbrewery supplies

Goldy Hops

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 2 WEEKS TIME.
Suggested lager time is 4 to 6 weeks.

Once upon a time there was a brew mistress that ran into three beers. She was looking for the perfect pour, but the first one she tasted was too hoppy. The second beer was too malty, and the third was too light. Finally she decided to create a beer that was just right, light in color but full bodied, with a generous hop flavor that rounds out the malt flavor perfectly. Finally, the perfect pour!

RECIPE INCLUDES:
1 Can High Country Canadian Draft
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of beer mix)
2 Packets US Goldings Pellet Hops
1 Muslin Hop Sack
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
1 Cup Honey

Goldy Hops

Flavor: Hoppy
Alc/Vol: 4.2%
SRM (Color): 3
IBU (Bitterness): 22

ABV -- Strength given in percent of alcohol by volume.

SRM -- Color based on Standard Reference Method, where as:
(fruits may give some additional color.)
- Pale Beers are between 0 - 6
- Amber Beers are between 7 - 13
- Dark Beers are 14 - 20
- Black Beers are 21 and over

IBU -- Shown in International Bittering Units, where:
- Low bitterness 0 - 20
- Moderate bitterness 21 - 30
- Noticeable bitterness 31 and over

Goldy Hops

Once upon a time there was a brew mistress that ran into three beers. She was looking for the perfect pour, but the first one she tasted was too hoppy. The second beer was too malty, and the third was too light. Finally she decided to create a beer that was just right, light in color but full bodied, with a generous hop flavor that rounds out the malt flavor perfectly. Finally, the perfect pour!

RECIPE INCLUDES:
1 Can High Country Canadian Draft
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of beer mix)
2 Packets US Goldings Pellet Hops
1 Muslin Hop Sack
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
1 Cup Honey

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

NOTE: BE SURE TO SANITIZE YOUR HOP SACK ALONG WITH ALL YOUR OTHER EQUIPMENT.

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet from under lid of beer mix, then place unopened can of mix in hot water to make the liquid easier to pour.

2.3. Place both packets (1 oz.) of US Golding pellet hops into the hop sack tying it closed, then trim away excess material.

2.4. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot, then SLOWLY sprinkle in 1/2 pouch (1 cup) of Booster™ while continually stirring to avoid clumping.

2.5. Once the Booster™ is fully dissolved, bring to a boil then remove from heat. Add 1 cup of honey, stir to mix well.

2.6. Stir beer mix and hops (in hop sack) into mixture. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE. KEEP HOPS IN FERMENTER THE ENTIRE FERMENTATION PERIOD.

2.7. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously to mix well.

2.8. Sprinkle yeast into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.9. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF SEVEN DAYS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 4 TO 6 WEEKS.

1-Liter Deluxe Bottling System (Qty 8)
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: Out of stock!

Professional Bottling System
$35.87

AVAILABILITY: In stock!



	Privacy Policy \| Shipping Policy \| MR.BEER® Community \| Product Registration \| Contact Us \| Help Desk MR.BEER® is a division of Catalina Products, LLC. ©2010 All rights reserved.