Mr.Beer - beer kits, home brewing systems, and microbrewery supplies

Bombay Bliss IPA

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 3 WEEKS.
OG: 1.061 (approx.) -- FG: 1.015 (approx.)
Suggested lager time is 2 months.

High in alcohol, with a ton of hops, IPAs were originally brewed to mature through the long voyage from England to India. This deep amber example of the classic style is well worth the wait.

RECIPE INCLUDES:
1 Can Classic American Blonde Ale HME
1 Can Bewitched Red Ale HME
1 Pouch Booster™
2 Packets Dry Brewing Yeast (under lid of HMEs)
1 Packet Columbus Pellet Hops
1 Muslin Hop Sack
1 Packet No-Rinse Cleanser

Bombay Bliss IPA

Flavor: Hoppy
ABV (alc/vol): 6.0%
SRM (Color): 10
IBU (Bitterness): 29

ABV -- An estimate of alcohol content given in percent of alcohol by volume. Your actual abv may vary.

SRM -- Color based on Standard Reference Method, where as:
- Pale Beers are between 0 - 6
- Amber Beers are between 7 - 13
- Dark Beers are 14 - 20
- Black Beers are 21 and over
(fruits may add additional color.)

IBU -- Bitterness shown in International Bittering Units, where:
- Low bitterness 0 - 20
- Moderate bitterness 21 - 30
- Noticeable bitterness 31 and over

Bombay Bliss IPA

High in alcohol, with a ton of hops, IPAs were originally brewed to mature through the long voyage from England to India. This deep amber example of the classic style is well worth the wait.

RECIPE INCLUDES:
1 Can Classic American Blonde Ale HME
1 Can Bewitched Red Ale HME
1 Pouch Booster™
2 Packets Dry Brewing Yeast (under lid of HMEs)
1 Packet Columbus Pellet Hops
1 Muslin Hop Sack
1 Packet No-Rinse Cleanser

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

NOTE: BE SURE TO SANITIZE YOUR HOP SACK ALONG WITH ALL YOUR OTHER EQUIPMENT.

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packets from under lid of HMEs, then place unopened cans of mix in hot water to make the liquid easier to pour.

2.3. Place entire packet (1/2 oz.) of Columbus pellet hops into the hop sack tying it closed, then trim away excess material.

2.4. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot, then SLOWLY sprinkle in Booster™ while continually stirring to avoid clumping.

2.5. Once the Booster™ is fully dissolved, bring to a boil then remove from heat.

2.6. Stir both HMEs and hops (in hop sack) into mixture of water and Booster™. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE. KEEP HOPS IN FERMENTER THE ENTIRE FERMENTATION PERIOD.

2.7. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously to mix well.

2.8. Sprinkle yeast (from both packets) into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.9. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF TWO WEEKS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 2 MONTHS.

1-Liter Deluxe Bottling System (Qty 8)
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: In stock!

Professional Bottling System
$35.87

AVAILABILITY: In stock!



	Privacy Policy \| Shipping Policy \| Community Forum \| Product Registration \| Contact Us \| Help Desk MR.BEER® is a division of Catalina Products, LLC. ©2011 All rights reserved.