Mr.Beer - beer kits, home brewing systems, and microbrewery supplies

Cold Morning Maple Wheat

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 3 WEEKS.
OG: 1.053 (approx.) -- FG: 1.013 (approx.)
Suggested lager time is 2 to 4 weeks.

The delicate maple flavor of this beer is great with pancakes as an early morning refresher or as a lunchtime snack. Be sure to use real maple syrup for the best flavor.

RECIPE INCLUDES:
1 Can Whispering Wheat Weizenbier HME
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of HME)
1 Packet Tettnanger Pellet Hops
1 Muslin Hop Sack
1 Packet No-Rinse Cleanser

YOU PR0VIDE:
1 1/2 Cups Pure Maple Syrup

Cold Morning Maple Wheat

Flavor: Malty
ABV (alc/vol): 5.2%
SRM (Color): 15
IBU (Bitterness): 18

ABV -- An estimate of alcohol content given in percent of alcohol by volume. Your actual abv may vary.

SRM -- Color based on Standard Reference Method, where as:
- Pale Beers are between 0 - 6
- Amber Beers are between 7 - 13
- Dark Beers are 14 - 20
- Black Beers are 21 and over
(fruits may add additional color.)

IBU -- Bitterness shown in International Bittering Units, where:
- Low bitterness 0 - 20
- Moderate bitterness 21 - 30
- Noticeable bitterness 31 and over

Cold Morning Maple Wheat

The delicate maple flavor of this beer is great with pancakes as an early morning refresher or as a lunchtime snack. Be sure to use real maple syrup for the best flavor.

RECIPE INCLUDES:
1 Can Whispering Wheat Weizenbier HME
1 Pouch Booster™
1 Packet Dry Brewing Yeast (under lid of HME)
1 Packet Tettnanger Pellet Hops
1 Muslin Hop Sack
1 Packet No-Rinse Cleanser

YOU PR0VIDE:
1 1/2 Cups Pure Maple Syrup

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

NOTE: BE SURE TO SANITIZE YOUR HOP SACK ALONG WITH ALL YOUR OTHER EQUIPMENT.

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet from under lid of HME, then place unopened can in hot water to make the liquid easier to pour.

2.3. Place 2/3 packet (1/3 oz.) of Tettnanger pellet hops into the hop sack tying it closed, then trim away excess material. (Save the balance of the hops in the freezer for another batch of beer.)

2.4. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot, then SLOWLY sprinkle in 1/2 pouch of Booster™ (1 cup) while continually stirring to avoid clumping.

2.5. Once the Booster™ is fully dissolved, bring to a boil then remove from heat.

2.6. Stir HME, hops (in hop sack) and 1 1/2 cups of maple syrup into mixture of water and Booster™. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE. KEEP HOPS IN FERMENTER THE ENTIRE FERMENTATION PERIOD.

2.7. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously to mix well.

2.8. Sprinkle yeast into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.9. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF TWO WEEKS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 2-4 WEEKS.

1-Liter Deluxe Bottling System (Qty 8)
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: In stock!

Professional Bottling System
$35.87

AVAILABILITY: In stock!



	Privacy Policy \| Shipping Policy \| Community Forum \| Product Registration \| Contact Us \| Help Desk MR.BEER® is a division of Catalina Products, LLC. ©2011 All rights reserved.