Welcome to MR.BEER® - Ruck and Maul Red

Ruck and Maul Red

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 3 WEEKS TIME.
Suggested lager time is 2 to 4 weeks.

This is a great beer to drink after the victory! A true English Ale brewed with a bit of the Rugby spirit. This beer is so good, you'll need to protect the keg from the other team, but don't lose any teeth doing so!

RECIPE INCLUDES:
1 Can Octoberfest Vienna Lager
1 Can Whispering Wheat Weizenbier
2 Packets Dry Brewing Yeast (under lid of beer mix)
1 Packet Columbus Pellet Hops
1 Packet Perle Pellet Hops
1 Muslin Hop Sack
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
1/2 Cup Honey

Ruck and Maul Red

Flavor: Hoppy
Alc/Vol: 4.6%
SRM (Color): 12
IBU (Bitterness): 40

ABV -- Strength given in percent of alcohol by volume.

SRM -- Color based on Standard Reference Method, where as:
(fruits may give some additional color.)
- Pale Beers are between 0 - 6
- Amber Beers are between 7 - 13
- Dark Beers are 14 - 20
- Black Beers are 21 and over

IBU -- Shown in International Bittering Units, where:
- Low bitterness 0 - 20
- Moderate bitterness 21 - 30
- Noticeable bitterness 31 and over

Ruck and Maul Red

This is a great beer to drink after the victory! A true English Ale brewed with a bit of the Rugby spirit. This beer is so good, you'll need to protect the keg from the other team, but don't lose any teeth doing so!

RECIPE INCLUDES:
1 Can Octoberfest Vienna Lager
1 Can Whispering Wheat Weizenbier
2 Packets Dry Brewing Yeast (under lid of beer mix)
1 Packet Columbus Pellet Hops
1 Packet Perle Pellet Hops
1 Muslin Hop Sack
1 Packet One-Step™ Sanitizing Cleanser

YOU PR0VIDE:
1/2 Cup Honey

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

NOTE: BE SURE TO SANITIZE YOUR HOP SACK ALONG WITH ALL YOUR OTHER EQUIPMENT.

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet from under lid of both beer mixes, then place unopened cans in hot water to make the liquid easier to pour.

2.3. Place all pellet hops (1/2 oz Columbus and 1/2 oz Perle) into the hop sack, then tie it closed and trim away excess material.

2.4. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot and bring to a boil, then remove from heat. Add 1/2 cup of honey, stir to mix well.

2.5. Stir beer mix into mixture. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE. KEEP HOPS IN FERMENTER THE ENTIRE FERMENTATION PERIOD.

2.6. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Add hops (in hop sack), stir vigorously to mix well.

2.7. Sprinkle yeast from both packets into keg and allow to sit for 5 minutes. Stir vigorously again, then screw on lid.

2.8. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF TWO WEEKS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 2 TO 4 WEEKS.

1-Liter Deluxe Bottling System (Qty 8)
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: In stock!

Professional Bottling System
$35.87

AVAILABILITY: Out of stock!



	Privacy Policy \| Shipping Policy \| MR.BEER® Community \| Product Registration \| Contact Us \| Help? MR.BEER® is a division of Catalina Products, LLC. ©2009 All rights reserved.