Mr.Beer - beer kits, home brewing systems, and microbrewery supplies

German Hefeweizen

MAKES APPROX. 2 GALLONS OF BEER IN ABOUT 3 WEEKS.
OG: 1.046 (approx.) -- FG: 1.012 (approx.)
Suggested lager time is 1 month.

This is a fruity and spicy flavored brew that is a favorite in Germany. It is normal for this beer to have a remarkably cloudy finish. A liquid yeast strain accompanies the recipe in order to replicate the true flavors of a traditional hefeweizen.

RECIPE INCLUDES:
1 Can Whispering Wheat Weizenbier HME
1 Can Pale Export UME
1 Packet Dry Brewing Yeast (under lid of HME)
1 Packet Saaz Pellet Hops
1 Pouch Weihenstephan Weizen Liquid Yeast
1 Muslin Hop Sack
1 Packet No-Rinse Cleanser

REFRIGERATE YEAST UNTIL USE: 34-40° F (1-4° C). DO NOT FREEZE.

German Hefeweizen

Flavor: Balanced
ABV (alc/vol): 4.5%
SRM (Color): 5
IBU (Bitterness): 18

ABV -- An estimate of alcohol content given in percent of alcohol by volume. Your actual abv may vary.

SRM -- Color based on Standard Reference Method, where as:
- Pale Beers are between 0 - 6
- Amber Beers are between 7 - 13
- Dark Beers are 14 - 20
- Black Beers are 21 and over
(fruits may add additional color.)

IBU -- Bitterness shown in International Bittering Units, where:
- Low bitterness 0 - 20
- Moderate bitterness 21 - 30
- Noticeable bitterness 31 and over

German Hefeweizen

This is a fruity and spicy flavored brew that is a favorite in Germany. It is normal for this beer to have a remarkably cloudy finish. A liquid yeast strain accompanies the recipe in order to replicate the true flavors of a traditional hefeweizen.

RECIPE INCLUDES:
1 Can Whispering Wheat Weizenbier HME
1 Can Pale Export UME
1 Packet Dry Brewing Yeast (under lid of HME)
1 Packet Saaz Pellet Hops
1 Pouch Weihenstephan Weizen Liquid Yeast
1 Muslin Hop Sack
1 Packet No-Rinse Cleanser

NOTE: A DAY OR TWO BEFORE BREWING, ACTIVATE YOUR LIQUID YEAST, FOLLOWING THE INSTRUCTIONS ON THE BACK OF THE YEAST PACKET.

Step 1: Sanitizing
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS. (You can find a copy of these instructions to download by clicking on the "Kits" tab of the website.)

NOTE: BE SURE TO SANITIZE YOUR HOP SACK ALONG WITH ALL YOUR OTHER EQUIPMENT.

Step 2: Brewing
2.1. Fill keg with cold water to the 4-quart mark on the back.

2.2. Remove yeast packet (not needed for this recipe) from under lid of HME, then place unopened cans of HME and UME in hot water to make the liquid easier to pour.

2.3. Place 2/3 packet (1/3 oz.) of Saaz pellet hops into the hop sack tying it closed, then trim away excess material. (Save the balance of the hops in the freezer for another batch of beer.)

2.4. Using the sanitized measuring cup, place 4 cups of water into a clean 3-quart pot and bring to a boil, then remove from heat.

2.5. Stir HME, UME and hops (in hop sack) into this water. This mixture is called the wort.

NOTE: HOPS MAY APPEAR AS GREEN LEAF PARTICLES AND WILL NOT DISSOLVE. KEEP HOPS IN FERMENTER THE ENTIRE FERMENTATION PERIOD.

2.6. Pour wort into keg. Bring the volume of the keg to the 8.5-quart mark by adding more cold water. Stir vigorously to mix well.

2.7. Pour entire contents of liquid yeast into keg. Stir vigorously again, then screw on lid.

2.8. Ferment by placing the keg out of direct sunlight and in a location with a consistent temperature. Allow beer to FERMENT A MINIMUM OF TWO WEEKS at room temperature (between 68°-76°F).

Step 3: Bottling & Carbonating
Follow the steps outlined in your MR.BEER® BEER KIT INSTRUCTIONS.

TIP: FOR BEST RESULTS ALLOW TO LAGER FOR AT LEAST 1 MONTH.

1-Liter Deluxe Bottling System (Qty 8)
$13.95

AVAILABILITY: In stock!

16 oz. Glass Swing-Top Bottles (Qty 12)
$29.95

AVAILABILITY: In stock!

Professional Bottling System
$35.87

AVAILABILITY: In stock!



	Privacy Policy \| Shipping Policy \| Community Forum \| Product Registration \| Contact Us \| Help Desk MR.BEER® is a division of Coopers DIY, LLC. ©2012 All rights reserved.