American Ale Deluxe Refill

American Ale Deluxe Refill is rated 4.4 out of 5 by 53.
  • y_2021, m_7, d_26, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_2, bvpage2n
  • co_hasreviews, tv_20, tr_33
  • loc_en_US, sid_90-11952-03, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_mrbeer
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 64.16ms
  • Our Refills come with everything that is needed to brew your next batch of great tasting beer. 
  • All of our Refills are done brewing within 10-14 days and are for brewing 2-gallon batches. 
  • Mr. Beer's brewing extract is formulated and produced by master brewers at Coopers Brewery in Australia using the highest quality and all-natural barley and hops. 
  • Every Mr. Beer Refill comes with Coopers proprietary brewing yeast that performs well in a wide range of temperatures. 
  • With this Refill, you will get our American Ale HME, 2 Pouches of BrewMax LME Pale, 1 packet of No-Rinse Cleanser, and 1 packet of brewing yeast
  • If you enjoy drinking Deschutes Mirror Pond or Dale's Pale Ale then this is the Refill for you!
$25.16 Regular Price $27.95
Customize American Ale Deluxe Refill

* Required Fields

Your Customization
American Ale Deluxe Refill
American Ale Deluxe Refill

In stock



    STEP 1: Sanitizing

    Cleaning is one of the most important steps in brewing. It kills microscopic bacteria, wild yeast and molds that may cause off-flavors in your beer. Make certain to clean all equipment that comes in contact with your beer by following the directions below:

    1. Fill clean keg with warm water to line mark 1 on the back, then add ½ pack (about 1 tablespoon) of No-Rinse Cleanser and stir until dissolved. Once dissolved, the solution is ready to use. Save the remaining ½ of No-Rinse Cleanser because you will need it for bottling.

    2. Screw on lid and swirl the keg so that the cleaning solution makes contact with the entire interior of the keg, including the underside of the lid. Note that the ventilation notches under the lid may leak solution. Allow to sit for at least 2 minutes and swirl again.

    3. To clean the spigot, open it fully and allow liquid to flow for 5 seconds and then close.

    4. Pour the rest of the solution from the keg into a large bowl. Place your spoon/whisk, can opener and measuring cup into the bowl to keep them cleaned throughout the brewing process. Leave them immersed for at least 2 minutes in cleaning solution prior to using.

    5. After all surfaces have been thoroughly cleaned, do not rinse or dry the keg or utensils. Return lid to top of keg, proceed immediately to brewing.


    Brewing beer is the process of combining a starch source (in this case, a malt brewing extract) with yeast. Once combined, the yeast eats the sugars in the malt, producing alcohol and carbon dioxide (CO2). This process is called fermentation.

    1. Remove the yeast packet from under the lid of the can of brewing extract, then remove the label from the can. Place the unopened can in hot tap water

    2. Using the clean measuring cup, pour 4 cups of water into your 4-quart or larger pot. Bring water to a boil, and then remove pot from heat.

    3. Open packet of BrewMax LME and the can of brewing extract and pour it into the pot. Stir until thoroughly mixed. This mixture is the wort.

    4. Fill the keg with cold water to line mark 1 on the back. The water must be cold (ideally from the refrigerator) with a temperature of 40-55°F/4-12°C. For the best results, we recommend using bottled spring water or filtered tap water. If using any other fermenter this would be approximately 1 gallon of water.

    5. Pour the wort into the keg and then bring the volume of the keg up to line mark 2 by adding more cold water. Mix vigorously with the plastic spoon/ whisk. Be careful to not scratch the inside of the keg, which could create small spaces for bacteria to grow. (If you have a different fermenter top it off with cold water to the 8.5-liter mark).

    6. Sprinkle the entire yeast packet into the keg and then screw on the lid.Do not stir.

    7. Allow your fermenter to sit for 10-14 days.

    Store the fermenter in a cool, dark place between 68-78°F/20-26°C for the yeast to work properly. The ideal temperature range is 70-72°F / 21-22°C. After a few days the foam and activity will subside and your batch will appear to be dormant. However, the yeast is still at work, slowly finishing the fermentation process.

    STEP 3: Bottling & Carbonating

    After 10 days, taste a small sample to determine if the beer is fully fermented and ready to bottle. If it tastes like flat beer, it is ready. If it’s sweet, then it’s not ready. Let it ferment for 4 more days (14 total). At this point it is time to bottle. Do not let it sit in the fermenter for longer than 24 days total.

    1.When your beer is ready to bottle, fill a 1-gallon container with warm water, then add the remaining ½ pack of the No-Rinse Cleanser and stir until dissolved. Once dissolved, it is ready to use.

    2. Distribute the cleaning solution equally among the bottles. Screw on caps (or cover with metal cap if using glass bottles) and shake bottles vigorously. Allow to sit 10 minutes, then shake the bottles again. Remove caps and empty all cleaning solution into a large bowl. Use this solution to clean any other equipment you may be using for bottling. Do not rinse.

    3. Add 2 Carbonation Drops to each 740-mL bottle. For 1-liter bottles, add 2 ½ drops; for ½-liter bottles add 1 drop. Alternatively, you can add table sugar using this table as a guide

    4. Holding the bottle at an angle, fill each bottle to about 2 inches from the bottle’s top.

    5. Place caps on bottles, hand tighten, and gently turn the bottle over to check the bottle’s seal. It is not necessary to shake them.

    6. Store the bottles upright and out of direct sunlight in a location with a consistent temperature between 70°-76°F or 21°-24°C. Allow to sit for a minimum of 14 days. If the temperature is cooler than suggested it may take an additional week to reach full carbonation. 

    Tip from our Brewmasters

    After the primary carbonation has taken place your beer is ready to drink. We recommend putting 1 bottle in the refrigerator at first for 48 hrs. After 48hrs. give it a try and if it is up to your liking put the rest of your beer in the fridge. If it does not taste quite right, leave the bottles out at room temp for another week or so. Keep following this method until your brew tastes just how you like it. 

    This process is called conditioning and during this time the yeast left in your beer can help clean up any off flavors. Almost everything gets a little better with time and so will your beer.

    Rated 5 out of 5 by Alvin55 from Really good beer. This was my first brew. Nice color and great flavor. Might be my favorite Mr Beer refill.
    Date published: 2016-01-10
    Rated 4 out of 5 by Rotten Rod from Nice light beer. I added about a cup of sorghum molasses to this one. I gave it two and a half weeks in the barrel and three weeks in the bottles. This is a much better version of the classic American beer. I find it to be refreshing after working outside or with a burger dinner (I should note that I prefer very dark porters and stouts).
    Date published: 2016-04-09
    Rated 5 out of 5 by Anonymous from If I can do it, we all can do it ! That I knew going in this was a good recipe. I better bring my A game, I thought and I did. Now It is just wait, and a whole lot of patience. I am happy, when you do something right you feel it. I better check the temperature' lol just kidding. Its good and an easy batch don't let the packaging fool ya.
    Date published: 2020-07-06
    Rated 4 out of 5 by Timmy Wall from Good for the first timers! Very smooth flavor Super easy recipe that came out great. I wasn't sure whether to use both LME's or save for next time, a 7.5% ABV Pale Ale is a bit strong! Love this brew and excited about the Irish Stout
    Date published: 2020-06-29
    Rated 5 out of 5 by Anonymous from Low Carbonation I just recently opened a bottle and it tastes really good. It isn't as carbonated as I was going for, but that could have been something I did wrong. I did follow the instructions though.
    Date published: 2021-02-24
    Rated 1 out of 5 by NOT made easy from Unclear Directions are unclear for beginners. We bought deluxe refills and it came with “brewmax lme soft packs”, but there was nothing in the directions of what to do with it or when to add it.
    Date published: 2021-01-09
    Rated 5 out of 5 by Lettucefish from Delicious and pretty too! A work of art. I have my third batch brewing now. This is the best ale I've ever had. I just can't buy store bought anymore. The only thing difficult about the process is waiting for it to ferment.
    Date published: 2021-04-24
    Rated 4 out of 5 by prescottbrewmaster1 from The price was right! Bought 3 of these for 6 gallons total on sale for the right price, $10.00 each, could not pass up. Glass bottled all and enjoying, Pale ale for all. Holiday supply.
    Date published: 2018-11-30
    Rated 5 out of 5 by Anonymous from Excellent with a personal added kick Excellent as always, but this time even a bit better. I had a surplus pack of Cascade hops which I added, giving it a nice little extra kick of taste.
    Date published: 2020-10-11
    Rated 1 out of 5 by Dobika from Almost expired I recently bought an American ale deluxe kit. When it arrived it was within 2 weeks of expiration. I made the beer and it didn’t come out good at all.
    Date published: 2019-01-14
    Rated 5 out of 5 by LewBrew from American Ale fits the day! I was very pleased with my brew outcome in its color and pleasantly clean but flavorful taste profile. I have already reordered for s second brew!
    Date published: 2020-12-28
    Rated 5 out of 5 by Bob L from Love Mr. BEER Very easy to brew, but most importantly I enjoy drinking it. There is nothing more satisfying than drinking a beer that you made.
    Date published: 2021-02-17
    Rated 5 out of 5 by Spud 1 from American ale This brew is amazing, I just brewed a double batch because I drink it too fast, it is a smooth beer, it just tastes amazing
    Date published: 2020-07-26
    Rated 5 out of 5 by Anonymous from American Ale I just brewed it this past weekend, it is now fermenting, but based on my previous brews, I expect it to be very good
    Date published: 2021-01-19
    Rated 5 out of 5 by M C Muller from American Ale Great tasting full body American Ale! I would recommend this Ale to anyone who enjoys a lighter Ale.
    Date published: 2021-01-10
    Rated 4 out of 5 by Country Mama from Livin' the dream Nice basic beer. Added some great Washington State hops and enjoyed it with family and friends.
    Date published: 2021-01-03
    Rated 4 out of 5 by JamesW4280 from Great beer Great tasting beer! Will order again. Still new to all this and need to learn a couple tricks.
    Date published: 2020-07-20
    Rated 5 out of 5 by Mike A from American Ale deluxe refill Wry smooth and drinkable. Well balanced and goes quickly. Will definitely do this one again.
    Date published: 2021-01-21
    Rated 5 out of 5 by RSLS1969 from Quality Product! Fast shipment and well packed, easy to understand instructions and makes great beer!
    Date published: 2017-11-16
    Rated 5 out of 5 by Solo from Great American Ale! Very refreshing brew! Well rounded taste, with a nice crisp finish. Excellent!
    Date published: 2021-05-11
    Rated 3 out of 5 by Rays from Rays Best I've bought this mix several times in the past. And added more additives.
    Date published: 2017-04-23
    Rated 5 out of 5 by Adam S from So easy and so good First batch turned pit great, cant wait to start my next batch flavors
    Date published: 2020-12-26
    Rated 5 out of 5 by Hamil from Love Mr beer Very easy to make and if you have a problem they are there to help.
    Date published: 2017-03-18
    Rated 5 out of 5 by Jerry D from Exciting and Fun This was the one I just opened yesterday it was awesome
    Date published: 2021-06-05
    Rated 4 out of 5 by Anonymous from Smooth Ale Good, smooth ale. Could use a little more carbonation
    Date published: 2020-09-27
    • y_2021, m_7, d_26, h_19
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
    • cp_2, bvpage2n
    • co_hasreviews, tv_20, tr_33
    • loc_en_US, sid_90-11952-03, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_mrbeer
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getReviews, 4.73ms
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 37.23ms
    • bvseo-msg: HTTP status code of 404 was returned;