Spigot Assembly With Nut & Washer - Black Locking Spigot
Spigot Assembly With Nut & Washer - Black Locking Spigot is rated
out of
5 by
105.
Replacement spigot assembly for both our 2-Gallon LBK Fermenter.
$3.95
SKU
20-31150-00
Replacement spigot assembly for both our 2-Gallon LBK Fermenter.
Rated 5 out of
5
by
Erik S from
Great Spigot to replace an older one
I bought this to replace an older white spigot that came with an older LBK that I had acquired. For the LBK I had, it fit perfectly and allowed me to replace the older/leaky (from the inside, not the cask seal) spigot. It also works with the bottling want whereas the original did not.
Date published: 2022-09-24
Rated 2 out of
5
by
Kelle from
Spigot
The big issue on the spigot is the washer. The washer is not malleable enough to seal. I leaking issues and had another fermenter with new spigot and washer and had the same leaking issue. I ended up using a food grade silicone washer that had a tighter fit and sealed perfectly the first time.
Overall the spigot worked well the washer was the only issue. Only other suggestion is to add another 1 inch or so to the spout on the spigot. I do not use a bottling wand so another inch would make it a bit easier for bottling.
Date published: 2021-02-07
Rated 1 out of
5
by
Josh N from
Seal Leaks
I hadn't brewed in a couple years, so I bought a new spigot to ensure I had a good seal. Boy I was wrong. I brewed my batch, started filling the fermenter with ice and water. When I added the wort, I noticed it all over the counter. Upon cleaning up the mess, I noticed the spigot was leaking. I ended up having to dump it down the drain as I had no way to tighten it. After dumping it, I tried changing up the spigot seal, to no success. Not sure what to do now.
Date published: 2022-04-09
Rated 2 out of
5
by
FLRHCARR from
On Stop Off
Either I don't get it, or I need to try it later.
I put this petcock on my old fermenter, to use with the new wand to ease filling. I wasn't successful.
I had to go back to using my old hose method. Which I was successful with.
The problem that I was having, is that the beer stopped flowing after a few inches into the bottle. I did try having more angle, less angle & no angle. I couldn't get it to fill the bottle. So I modified the wand end (Which fits very well), to my filling hose, so I could bottle my brew.
The nozzle is nice, in that it turns off or has a partial off (midway), which will facilitate faster bottling. That is, compared to my press & hold petcock. So if you're a fan of turn to flow spigot for bottling, this is a great one to have. Like all Mr. Beer items, it works very well, & expect to have it for many years.
Date published: 2021-09-08
Rated 5 out of
5
by
Jim Bimbi from
Small item, HUGE improvement!
This new locking spigot is a HUGE improvement over the one on my older model of brew keg. The old one with the push value was a pain, especially when the keg got low as it was hard not to keep the keg from moving around and stirring up the sediment. Bottling has become a less stressful process.
Date published: 2021-09-13
Rated 5 out of
5
by
Anonymous from
Works Great!
They work great as replacement spigots on my Mr Beer LBKs. I don’t care for the push tab versions (as they tend to leak and it’s a pain to hold it open during the entire transfer of liquid) and replaced all of mine with these.
Date published: 2022-08-09
Rated 5 out of
5
by
Codie from
Quick and easy.
So I had a rather ancient LBK laying around, but it had the old style spout. This came quickly, installed easily and works GREAT. No way to attach tubing to the old style, so this is great.
Date published: 2021-04-25
Rated 5 out of
5
by
Bobe from
Replacement black Fermenter spigot
It works great without an issue, so I am fine with this. The main use is to stop flow when you want and restart when you do and that is what it does. Easy to use and clean.
Date published: 2021-10-05