Bottling Wand Assembly
Bottling Wand Assembly is rated
out of
5 by
61.
Reduce bottling time with our bottling wand accessory. Used with the normal spigot that came with your kit, the bottling wand reduces aeration of the beer, leading to a longer shelf-life and reduce the risk of contamination.
- 1 Bottling Wand w/Spring-loaded Valve
- 1 Polypropylene Tube Adapter
$2.51
Regular Price
$2.95
SKU
90-15200-00
Reduce bottling time with our bottling wand accessory. Used with the normal spigot that came with your kit, the bottling wand reduces aeration of the beer, leading to a longer shelf-life and reduce the risk of contamination.
- 1 Bottling Wand w/Spring-loaded Valve
- 1 Polypropylene Tube Adapter
The polypropylene tube adapter is only needed for older style spigots (with side to side lever motion) and not our new spigot (with a top mounted lever). If you need help identifying which spigot you have our Customer Service Reps will be happy to assist!
Rated 1 out of
5
by
WortTheWait from
Doesn't fit
Was super excited to switch over to bottling this was to reduce aeration with bottling day. I bought the new spigot to go with it thinking it would fit well. It was very loose and would either ride up too high and stop the flow (then leak around the outside) or if I bumped it just removing a bottle of beer it would fall out (with the spigot in the on position and spill a few bottles worth of beer on the floor). Looks like it was designed for the barbed spigot though the website specifically says "works with our new spigot without an adapter".
Would not recommend unless you absolutely know it's going to fit. Otherwise, total waste of money. (And beer)
Date published: 2020-10-31
Rated 5 out of
5
by
gibvel from
Best accessory for the LBK
I just bottled my first batch with this wand. This is, by far, the best thing I've bought for brewing with the LBK. Generally, with the LBK, when you empty the keg to the last couple bottles it's hard to turn the spigot on and off without moving the keg and causing perturbation in the liquid.
This makes it so easy to bottle. Just turn the spigot on and put the bottle onto the wand and the beer pours in.
Worth every penny!
Date published: 2016-11-03
Rated 1 out of
5
by
JRCasual Brewer from
What a mess
I thought this thing was really long when it arrived, and sure enough it was. That made it hard to sanitize. Then when I put it in the keg it was really low to be able to bottle. But it didn’t matter because it leaked everywhere anyway. I took it out and just bottled the regular way with no issues.
Date published: 2018-09-08
Rated 3 out of
5
by
Fusion from
Bottling wand worked
The bottling wine made by Mr Beer Works but my only issue is that every time I use it it leaks.
Date published: 2017-03-06
Rated 5 out of
5
by
markusgurley from
Didn't spill a drop!
Works great! I purchased the bottling wand assembly at the recommendation of several users --- good advice! I bottled my first batch of brew and didn't spill a drop! (the wife was happy as well)
Date published: 2017-03-09
Rated 5 out of
5
by
Sparty13 from
You NEED this!
This has made bottling my LBK so much easier I cannot imagine doing it without this product now.
Date published: 2017-03-03
Rated 3 out of
5
by
Anonymous from
Great concept with a learning curve
Definitely love this more than the idea of splashing the beer into the bottle straight from the spigot. Comes with a learning curve though. If you push up too hard on the bottle, you'll jam the wand into the spigot & cut off the flow. My first time was a constant trail and error of "did I push the spigot up again? Or is there chum blocking the flow?" If you pull it out too far, it comes out, and you'll get some sticky beer residue all over the wand which makes the bottling experience less fun. I hope I get better with practice.
Date published: 2020-10-24
Rated 2 out of
5
by
Lazyk0 from
Good concept
This is needed to bottle with the bucket type fermenters and the different valve. Great concept but it leaks and drips while sealing and changing bottles. I have tried to get it to seal with not much luck and don’t like the brew leaking onto floor. I’m working on a way to use o-rings to get a seal.
Date published: 2017-12-21